The fully automatic side truck dumper is a kind of automobile bulk material unloading device invented by our company for unmanned unloading. The device only needs the driver to open the door, and the other unloading procedures and safety monitoring equipment can be completed automatically, with high degree of automation. The flip angle is large (45°) and the safety performance is high. It is divided into bottom support and side support. The side support can greatly reduce the cost of civil construction investment. Widely used in food, chemical, steel, coal and other industries.

The main beam of the platform is a rectangular tube, which is welded and formed according to the vertical and horizontal distribution. The surface of the platform is 8mm thick pattern plate, the overall structure has sufficient strength and rigidity to ensure that no deformation occurs during the lifting process.

The hydraulic pump station is a whole. The entire hydraulic system has been debugged before leaving the factory. If the ground is uneven, the steel plate should be used to plug it. This system is all connected by high-pressure hoses, which is fast and convenient, and does not need to be cleaned. The oil pipes are connected and tightened in sequence according to the hydraulic schematic diagram. There should be no leakage. The direction and layout of the oil pipes should not have strong bends or strong pressure.

Platform Length：13m,16m,17m,18m,（According to customer needs can be designed separately）

Platform Width:3.5m

Maximum inclination:0~55°

Maximum lifting weight：50-150t（According to customer needs can be designed separately）

Platform rise time：180s~240s

Platform landing time:180s~240s

Motor Power: 45KW

Allow system operating temperature: +10 º C∽+55 º C（Low temperature resistant hydraulic oil is required in severe cold areas）

http://www.truckdumpercn.com/